1)       High resolution STN-LCD display

2)       Built-in large memory electronic chart

3)       High accuracy GPS receiver

4)       Versatile display mode include

-          Plotter screen

-          Echo sounder screen

-          Nav. Data

-          Dual display (Plotter/Echo sounder)

-          Satellite information

5)       Quick chart drawing speed

6)       Display of vessel tracks, waypoint and planned route on electronic chart

7)       Choice of 50 KHz or 200 KHz 300W echo-sounder (KP-1038)

8)       Depth date display on plotter screen (KP-1038)

9)       7 color targets presentation (KP-1038)

10)   Auto mode for hand-off operation (KP-1038)

11)   Use of an advanced processor

12)   Low power consumption

GPS Receiver Characteristics

1.       Receiver type

12 discrete channels, C/A code all-in-view

2.       Receive frequency

L1 (1575.42 MHz)

3.       Accuracy

10m approx. (95% of the time SA off)

4.       Time to first fix

12 seconds typical (warm start)

5.       Tracking velocity

900 Knots

Plotter Characteristics

1.       Display

10.4” inch color STN-LCD, daylight viewing, 640 × 480 pixels

2.       Display modes

Selectable from the followings:

-          Full screen plotter mode

-          Full screen steering mode

-          Full Satellite information screen

-          Full screen echo sounder mode (KP-1038)

-          Dual display mode (plotter + sounder) (KP-1038)

3.       Projection

North-up Mercator

4.       Landmass display

Fill-in or outline, user-selectable

5.       Lighthouse display

Blinking, stationary or off

6.       Map scale ranges

1/N type ranges: 1/2,000 ～ 1/25,000.000

NM type ranges: 0.1 ～ 1500 nm

7.       Latitude limits

Between 85°N and 85°S

8.       Plot intervals

5s to 60 mins or 0.01 to 10nm

9.       Memory capacity

Up to 8,000 points for ship’s track and 4,000 waypoints

10.   Voyage planning

Waypoint navigation or route navigation

11.   Boundaries

7 color groups each consisting of up to 200 points

12.   Alarms

Anchor watch, Arrival, Boundary, Cross track error

13.   Data I/O

NMEA-0183 version 2.0 and RTCM-104

24 hour hh : mm format. Time offset

14.   UTC/Local Time

Entered manually

Echo Sounder Characteristics (KP-1038)

1.       Presentation colors

7 colors selectable from analog colors

2.       Display modes

Selectable from the following:

-          Full screen display

-          Split screen with mid-water expansion

-          Split screen with bottom expansion

A-scope display can be turned on/off with each of the above display

3.       Frequency

50 KHz or 200 KHz (Specify when ordering)

4.       Screen splitting modes

Vertical (default) or horizontal (optional)

5.       Basic range

M: 2.5, 5, 10, 15, 20, 30, 40, 50, 80, 100, 150, 200, 300, 500, 1000

FM: 2.5, 5, 10, 15, 20, 30, 40, 50, 80, 100, 150, 200, 300, 500, 1000

BR: 2.5, 5, 10, 15, 20, 30, 40, 50, 80, 100, 150, 200, 300, 500, 1000

FT: 5, 10, 20, 30, 40, 60, 80, 100, 150, 200, 300, 500, 1000, 2000, 3000

6.       Phasing (shift)

1 unit steps from 0 to 999

Meters/Fathoms/Braccia

7.       Picture Advance

Freeze, 1/16, 1/8, 1/4, 1/2, 1/1

8.       Alarms

Depth (Swallow and deep) and fish

9.       Output power

300W RMS standard (600W, 1000W option)

Environmental Conditions

Ambient temperature

0 to 45℃, 95% RH without condensation

Power Supply

1.       Power requirements

11 to 40 VDC, current drain: 1.0 A at 12 V (1.2 A at 12V for KP-1038) with on-screen readout of power source voltage

2.       Battery Alarm

Audible and Visual, presettable in 0.1 V steps

Equipment List (Standard)

1.       Display unit

2.       Antenna unit with 10m cable

3.       Remote control

4.       Operator manual

5.       Installation materials and standard spare parts

6.       Bronze transducer (only for KP-1038)